Contact mdi

Get Free Quote:
Contact Form
sales@
bekosales.com

 Hours:
7:30AM - 5:30PM ET
Monday - Friday

BEKOSPLIT®

BEKO Oil / Water Separators

Economical, high capacity emulsion treatment

BEKOSPLIT High Capacity Splitting Plant system from BEKO Technologies

  Models

BEKOSPLIT Plants


BEKOSPLIT emulsion treatment splitting plants from BEKO Technologies

Drag your finger across the table to scroll

Model Max. Compressor Performance Power Input Gauranteed Residual Oil Content Voltage (VAC) Processing Capacity (gal/h)
11 7,000 scfm < 100 VA < 10 ppm 100-230 VAC 4
12 7,000 scfm < 100 VA < 10 ppm 115 VAC 8
13 7,000 scfm < 100 VA < 10 ppm 115 VAC 16
14 7,000 scfm < 100 VA < 10 ppm 115 VAC 24
14 S* 7,000 scfm < 100 VA < 10 ppm 115 VAC 24
15 7,000 scfm < 100 VA < 10 ppm 115 VAC 32
16 7,000 scfm < 100 VA < 10 ppm 115 VAC 42

Notes:
* 14 S Features an extended capacity dosage unit
Model 11 has an integrated pre-separation tank.
All other units require a pre-separation tank.


Tanks

Drag your finger across the table to scroll

Tank Types Applicable BEKOSPLIT Models Max. Operating Pressure Oil Outlet Condensate Inlet Tank Capacity (gal)
Required Pre-Separation Tank 12 | 13 | 14 | 14 S 360 psig 32 mm 3 x 1/2" 158
12 - 16 360 psig 32 mm 3 x 1/2" 264
Optional 2nd Buffer Tank All Models 360 psig 32 mm 3 x 1/2" 158
360 psig 32 mm 3 x 1/2" 264

  Features

The BEKOSPLIT Principle

  • Hich Capacity Oil/Water Splitting Plant: 6 model sizes up to 7,000 scfm
  • Intelligent Electronic Control: superb reliability and maximum safety
  • Environmentally Friendly Splitting Agent: no additional chemicals or heat required
  • Lower Operating Costs: minimal power consumption, maintenance can be done in under ten minutes
  • Safe Operation for All Condensate: guaranteed to work even on the toughest jobs - meets every U.S. regulation

One liter of oil contaminates 1,000,000 liters of groundwater. Therefore, the law stipulates the professional and responsible handling of emulsified condensates that accumulate during many production processes. In many cases, processing by conventional physical gravity separation is not sufficient.

Environmentally-friendly processing

The BEKOSPLIT splitting plant allows for reliable, economic, and high volume processing of emulsified condensates that accumulate as a result of unfavorable initial conditions, or due to certain lubricant/compressor combinations. Water-insoluble organic pollutants, such as oils and solid impurities, are removed via the addition of a special alumina mineral. The pollution-free outflowing water can then be directly introduced into the wastewater system.

How does it work?


Diagram showing the operating principle of a BEKOSPLIT 11 emulstion treatment splitting plant from BEKO Technologies.
Diagram showing the operating principle of BEKOSPLIT 12 through 16 emulstion treatment splitting plants from BEKO Technologies.

For the preliminary purification, the wastewater to be processed is supplied to the pre-separation tank (2) via a pressure relief chamber (1). This process is unaffected by fluctuations in the wastewater inflow. The separated oil is discharged automatically (3), and the liquid levels are monitored by a capacitive electronic system that distinguishes accurately between air, oil and emulsion. This ensures that emulsion cannot get into the oil collector, and free parts cannot enter the splitting process. The pretreated wastewater is then pumped into the BEKOSPLIT reaction chamber (5) for fully automatic treatment. The reaction process uses bentonite as a splitting agent, a nontoxic natural alumina mineral which is stored in a metering unit (4) and stirred into the wastewater in amounts precisely adapted to the particular application. The splitting agent encapsulates the oil and dirt particles. This results in easily filterable macro flocs which are then removed by a bag filter (6). The purified water can now be discharged into the sewerage system.

  Dimensions

BEKOSPLIT Plants


Drawing showing the dimensions of a BEKOSPLIT emulsion treatment splitting plant

Drawing showing the dimensions of a BEKOSPLIT emulsion treatment splitting plant


Drag your finger across the table to scroll

Models A B C Weight
11 45.6 in 35.4 in 15.8 in 106 lbs
12 45.5 in 18.5 in 15.8 in 73 lbs
13 56.4 in 35.4 in 15.8 in 119 lbs
14 56.4 in 35.4 in 15.8 in 119 lbs
14 S* 56.4 in 35.4 in 15.8 in 121 lbs
15 57.9 in 39.4 in 24.8 in 168 lbs
16 57.9 in 39.4 in 24.8 in 168 lbs

Notes:
* 14 S features an extended capacity dosage unit
Model 11 has an integrated pre-separation tank.
All other units require a pre-separation tank.


Tanks


Drawing showing the dimensions of a pre-separation tank for BEKOSPLIT emulsion treatment splitting plants

Drawing showing the dimensions of an optional second buffer tank for BEKOSPLIT emulsion treatment splitting plants


Drag your finger across the table to scroll

Tank Types Applicable BEKOSPLIT Models Tank Capacity (gal) A B
Required Pre-Separation Tank 12 | 13 | 14 | 14 S 158 49.4 in 57.1 in
12 - 16 264 56.7 in 59.1 in
Optional 2nd Buffer Tank All Models 158 49.4 in 47.2 in
264 56.7 in 47.2 in

  Contact mdi

Please fill out the form below and your personal mdi product expert will email you your quote. The more information that you provide the quicker we can send you a quote. Sending an incomplete quote request could mean that we have to contact you for necessary information before sending your quote. And know that our knowledgeable sales staff is standing by to help you with your order and with any questions.






Please include your contact information so that we may reply to your request. Your contact information is private and will not be sold to any third party or used negatively in any way.










mdi does not advertise prices online. The cost of products is subject to change over time. In order to extend to you the best price that we can offer, we prefer to create written and emailed quotes which reflect any discounts or promotions currently available. Some products can be quoted over the phone, and expediting quotes and orders is always available per request.

See our Terms and Conditions for more information about the mdi sales process.


Call us any time Monday through Friday 7:30 AM to 5:30 PM ET.

Phone: (727) 835-0670 | Toll Free: 800-761-4298
Fax: (813) 571-0422 | Email or Fill Out the Form Above