Contact mdi

Get Free Quote:
Contact Form
sales@
bekosales.com

 Hours:
7:30AM - 5:30PM ET
Monday - Friday

BEKOMAT®

BEKO Condensate Drains

Intelligent condensate drainage with true zero air loss

BEKOMAT Standard series condensate drain.

  Models

Sizing Chart

Drag your finger across the table to scroll

Compressor BEKOMAT Size By Location
HP SCFM After Cooler Wet Receiver Tank Pre-Filter Refrigerant Dryer After-Filter Dry Receiver Tank
20 100 31 31 31 31 31 31
40 180 32 32 31 31 31 31
50 225 32 32 31 32 31 32
60 270 33 33 31 32 31 32
75 338 33 33 31 32 31 32
100 500 33 33 31 32 31 32
125 563 13 13 31 33 31 33
150 675 13 13 31 33 31 33
175 788 13 13 31 33 31 33
200 900 13 13 31 33 31 33
250 1125 13 13 32 13 32 13
300 1300 13 13 32 13 32 13
400 1800 14 14 32 13 32 13
500 2250 14 14 32 13 32 13
750 3375 14 14 33 14 33 14
1000 5000 14 14 33 14 33 14
1250 5625 16 16 13 14 13 14
1500 6750 16 16 13 14 13 14
1750 7875 16 16 13 14 13 14
2000 9000 16 16 13 14 13 14
2500 11250 16 16 13 16 13 16
3000 13500 16 16 13 16 13 16
4000 18000 16 16 14 16 14 16
5000 22500 16 16 14 16 14 16

Standard Series

For standard pressures


Group of BEKOMAT Standard Series condensate drains.

Drag your finger across the table to scroll

Models Min. / Max. Pressure Ambient Temperature Diaphragm Material Housing Protection
All Standard Models 12 / 232 psig +33 / +140°F Viton® NEMA 4

Drag your finger across the table to scroll

Model Connection (NPT) Standard Operating Voltage Flow Rate (scfm) Dryer Flow Rate (scfm) Filter Flow Rate (scfm)
31 1 x 1/2" 95-240 Vac | 50-60 Hz 100 200 1,000
32 1 x 1/2" 95-240 Vac | 50-60 Hz 225 450 2,250
33 3 x 1/2" 95-240 Vac | 50-60 Hz 500 1,000 5,000
33 CO* 3 x 1/2" 95-240 Vac | 50-60 Hz 500 1,000 5,000
13 2 x 1/2" 115 Vac | 50-60 Hz 1,300 2,600 13,000
13 CO* 2 x 1/2" 115 Vac | 50-60 Hz 1,300 2,600 13,000
14 3 x 3/4" 115 Vac | 50-60 Hz 5,400 10,800 54,000
14 CO* 3 x 3/4" 115 Vac | 50-60 Hz 5,400 10,800 54,000
16 CO* 2 x 3/4" / 1 x 1" 115 Vac | 50-60 Hz 50,000 100,000 500,000

* Hard coating
All models have aluminum housing
Optional voltages available on request (230 Vac, 48 Vac, 24 Vac, and 24 Vdc)


Specialty Series

For explosive atmospheres, moisture indication, and level sensing


Group of BEKOMAT Specialty Series condensate drains.

Drag your finger across the table to scroll

Models Standard Voltage Min. / Max. Pressure Ambient Temperature Diaphragm Material Housing Protection
3, 6 12 Vdc 12 / 232 psig +33 / +140°F Viton® NEMA 4

Drag your finger across the table to scroll

Model Connection (NPT) Flow Rate (scfm) Dryer Flow Rate (scfm) Filter Flow Rate (scfm)
3 CO EX* 3 x 3/4" 4,500 9,000 45,000
3 E EX** 3 x 3/4" 4,500 9,000 45,000
6 CO EX* 2 x 3/4" / 1 x 1" 50,000 100,000 500,000
6 E EX** 2 x 3/4" / 1 x 1" 50,000 100,000 500,000

* Aluminum housing + hard coating
** Stainless steel housing


Drag your finger across the table to scroll

Models Standard Voltage Ambient Temperature Diaphragm Material Housing Protection
12 KW 12 CO Ni
12 115 Vac 24 Vdc +33 / +140°F Viton® NEMA 4

Drag your finger across the table to scroll

Model Connection (NPT) Max. Pressure (psig)
12 KW* 1 x 1/2" 232
12 CO Ni 1 x 1/2" 360

All models have aluminum housing
* With moisture indicator


CV and NLV Series

For centrifugal compressors

Drag your finger across the table to scroll

Models Standard Voltage Ambient Temperature Diaphragm Material Housing Protection
All CV and NLV Models 115 Vac +33 / +140°F Viton® NEMA 4

Drag your finger across the table to scroll

Model Connection (NPT) Min. / Max. Pressure Flow Rate (scfm) Dryer Flow Rate (scfm) Filter Flow Rate (scfm)
13 CV 2 x 1/2" 12 / 232 psig 2,000 4,000 20,000
14 CV 3 x 3/4" 12 / 232 psig 8,000 16,000 80,000
16 CO CV 2 x 3/4" / 1 x 1" 12 / 232 psig 50,000 100,000 500,000
3 CO NLV 3 x 3/4" 0 / 360 psig 6,000 12,000 60,000
6 CO NLV 2 x 3/4" / 1 x 1" 0 / 232 psig 50,000 100,000 500,000

All models have aluminum housing
CV = Check-valve set
CO = Hard coating
NLV = No load valve


PN and E Series

For high pressure systems

Drag your finger across the table to scroll

Models Standard Voltage Ambient Temperature Diaphragm Material Housing Protection
All PN and E Models 115 Vac +33 / +140°F Viton® NEMA 4

Drag your finger across the table to scroll

Model Connection (NPT) Min. / Max. Pressure Flow Rate (scfm) Dryer Flow Rate (scfm) Filter Flow Rate (scfm)
12 CO PN 63 1 x 1/2" 12 / 912 psig 280 560 2,800
13 CO PN 50 2 x 1/2" 12 / 725 psig 1,300 2,600 13,000
14 CO PN 25 3 x 3/4" 12 / 360 psig 5,400 10,800 54,000
3 E 25 3 x 3/4" 12 / 360 psig 4,500 9,000 45,000
3 E 63 3 x 3/4" 12 / 912 psig 4,500 9,000 45,000
6 E 25 2 x 3/4" / 1 x 1" 12 / 360 psig 50,000 100,000 500,000

CO PN Models: Aluminum housing, hard coating + high pressure
E Models: Stainless steel housing + high pressure

  Features

The BEKOMAT Principle

  • True Zero Air Loss: Exclusive operating principle guarantees maximum energy savings
  • Highest Reliability: Integrated sieve keeps the drain operational and unaffected by dirt, and eliminates the need for a Y-strainer and extra maintenance
  • Lowest Maintenance: Reduce overall time and costs
  • Sensor Controlled: Ensures intelligent operation at all times and is safe for all condensate types
  • Fully Automatic: Monitors level and function
  • Integrated Alarm: Visual status indication is given on the drain and can be wired for remote access

The generation and processing of compressed air always involves the formation of condensate which, in most cases, contains oil, is contaminated with dirt particles, and disperses over the entire compressed air network - a system problem that can increase costs and cause damage. In addition, condensate does not accumulate regularly but varies depending on the climate, temperature, season, time of day, or the capacity utilization of the compressor. Using an electronically level controlled BEKOMAT, the condensate in the compressed air system is drained automatically.

Compared with conventional drains, the BEKOMAT has decisive advantages, especially since it:

  • functions unaffected by dirt, resulting in reliable operation
  • is equipped with an alarm signal
  • has large cross-sections to prevent emulsification
  • operates in accordance with the actual condensate quantity
  • avoids the unnecessary loss of compressed air

How does it work?


Diagram to illustrate the operating principles of a BEKOMAT condensate drain.

The condensate trickles through the inlet opening (1) and collects in the container (2). Initially, the valve is closed as, via the pilot supply line (3) and the solenoid valve (4), pressure differential above the membrane (5) is effected. The larger surface area above the membrane results in a high closing force. The membrane seat remains closed and leak-proof. When the container is filled with condensate, so that the capacitive level sensor (6) gets a signal at the maximum point [A], the solenoid valve switches over and the area above the membrane is vented. As a result of the decreasing pressure above the membrane, the membrane lifts off the membrane seat (7) and the overpressure in the housing forces the condensate into the discharge pipe (8).

  Dimensions

Standard Series


Drawing showing the dimensions of a BEKOMAT 31 condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
31 4.6 in 6.5 in 2.6 in 0.8 lbs


Drawing showing the dimensions of a BEKOMAT 32 condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
32 5.0 in 6.7 in 3.0 in 1.0 lbs


Drawing showing the dimensions of a BEKOMAT 33 condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
33 6.2 in 8.3 in 2.9 in 1.7 lbs
33 CO 6.2 in 8.3 in 2.9 in 1.7 lbs


Drawing showing the dimensions of a BEKOMAT 13 condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
13 6.4 in 8.3 in 3.7 in 4.4 lbs
13 CO 6.4 in 8.3 in 3.7 in 4.4 lbs


Drawing showing the dimensions of a BEKOMAT 14 condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
14 7.1 in 9.9 in 3.7 in 6.4 lbs
14 CO 7.1 in 9.9 in 3.7 in 6.4 lbs


Drawing showing the dimensions of a BEKOMAT 16 condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
16 CO 11.0 in 13.5 in 10.2 in 13.0 lbs

Specialty Series


Drawing showing the dimensions of a BEKOMAT 3 EX Specialty series condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
3 CO EX 9.5 in 8.4 in 6.3 in 7.5 lbs
3 E EX 9.5 in 8.4 in 6.3 in 7.5 lbs


Drawing showing the dimensions of a BEKOMAT 6 EX Specialty series condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
6 CO EX 11.4 in 13.5 in 10.2 in 14.8 lbs
6 E EX 11.4 in 13.5 in 10.2 in 14.8 lbs


Drawing showing the dimensions of a BEKOMAT 12 KW Specialty series condensate drain.

Drag your finger across the table to scroll

Model A B Depth
12 KW 5.6 in 5.9 in 2.6 in


Drawing showing the dimensions of a BEKOMAT 12 CO Ni Specialty series condensate drain.

Drag your finger across the table to scroll

Model A B Depth
12 CO Ni 5.8 in 5.9 in 2.6 in

CV / NLV Series


Drawing showing the dimensions of a BEKOMAT 13 CV condensate drain.

Drag your finger across the table to scroll

Model A B Weight
13 CV 6.4 in 10.8 in 4.6 lbs


Drawing showing the dimensions of a BEKOMAT 14 CV condensate drain.

Drag your finger across the table to scroll

Model A B Weight
14 CV 7.1 in 12.1 in 6.6 lbs


Drawing showing the dimensions of a BEKOMAT 16 CO CV condensate drain.

Drag your finger across the table to scroll

Model A B Weight
16 CO CV 11.0 in 13.5 in 13.2 lbs


Drawing showing the dimensions of a BEKOMAT 3 CO NLV condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
3 CO NLV 9.72 in 8.66 in 6.30 in 7.5 lbs


Drawing showing the dimensions of a BEKOMAT 6 CO NLV condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
6 CO NLV 11.22 in 13.39 in 10.24 in 14.8 lbs

High-Pressure Series


Drawing showing the dimensions of a BEKOMAT 12 CO PN 63 High Pressure condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
12 CO PN 63 5.8 in 6.2 in 2.6 in 2.0 lbs


Drawing showing the dimensions of a BEKOMAT 13 CO PN 50 High Pressure condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
13 CO PN 50 6.4 in 8.3 in 3.7 in 4.4 lbs


Drawing showing the dimensions of a BEKOMAT 14 CO PN 25 High Pressure condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
14 CO PN 25 7.1 in 9.9 in 4.7 in 6.4 lbs


Drawing showing the dimensions of a BEKOMAT 3 E High Pressure condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
3 E 25 9.5 in 10.1 in 6.3 in 7.5 lbs
3 E 63 9.5 in 10.1 in 6.3 in 7.5 lbs


Drawing showing the dimensions of a BEKOMAT 6 E 25 High Pressure condensate drain.

Drag your finger across the table to scroll

Model A B Depth Weight
6 E 25 10.8 in 12.2 in 10.2 in 14.8 lbs

  Contact mdi

Please fill out the form below and your personal mdi product expert will email you your quote. The more information that you provide the quicker we can send you a quote. Sending an incomplete quote request could mean that we have to contact you for necessary information before sending your quote. And know that our knowledgeable sales staff is standing by to help you with your order and with any questions.






Please include your contact information so that we may reply to your request. Your contact information is private and will not be sold to any third party or used negatively in any way.










mdi does not advertise prices online. The cost of products is subject to change over time. In order to extend to you the best price that we can offer, we prefer to create written and emailed quotes which reflect any discounts or promotions currently available. Some products can be quoted over the phone, and expediting quotes and orders is always available per request.

See our Terms and Conditions for more information about the mdi sales process.


Call us any time Monday through Friday 7:30 AM to 5:30 PM ET.

Phone: (727) 835-0670 | Toll Free: 800-761-4298
Fax: (813) 571-0422 | Email or Fill Out the Form Above