Contact mdi

Get Free Quote:
Contact Form
sales@
bekosales.com

 Hours:
7:30AM - 5:30PM ET
Monday - Friday

DRYPOINT® X / ACF

BEKO Compressed Air Dryers

Efficient low dew point desiccant drying

DRYPOINT X and ACF heatless desiccant air dryers from BEKO Technologies

  Models

DRYPOINT XCe Economy Heatless Desiccant Dryers

With basic controller and slanted seat valves

Drag your finger across the table to scroll

Models Standard Pressure Dew Point Optional Pressure Dew Point Approx. Purge Air Consumption Min. / Max. Operating Pressure Min. / Max. Air Inlet Temperature Standard Intelligent Power Supply
All XCe Models -40°F -100°F (on request) 15% at 100 psig / -40°F 60 / 150 psig 40°F / 120°F 120-240 Vac / 50-60 Hz
NEMA 4 Standard
Slanted Seat Valves Standard

Drag your finger across the table to scroll

Model Connection Size (NPT) Flow Rate (scfm)
XCe 80 3/4" 80
XCe 100 1" 100
XCe 120 1" 120
XCe 160 1-1/4" 160
XCe 200 1-1/4" 200
XCe 250 1-1/2" 250
XCe 300 1-1/2" 300
XCe 400 2" 400
XCe 500 2" 500
XCe 650 2-1/2" 650
XCe 800 2-1/2" 800

Drag your finger across the table to scroll

Operating Pressure (psig) 60 70 80 90 100 110 120 130 140 150
Correction Factor 0.65 0.74 0.83 0.91 1.00 1.12 1.16 1.20 1.25 1.29

Drag your finger across the table to scroll

Inlet Air Temperature (°F) 90 95 100 105 110 115 120
Correction Factor 1.07 1.04 1.00 0.86 0.73 0.64 0.55

DRYPOINT XCp Premium Heatless Desiccant Dryers

With standard humidity control and BEKOTOUCH PLC

Drag your finger across the table to scroll

Models Standard Pressure Dew Point Optional Pressure Dew Point Approx. Purge Air Consumption Min. / Max. Operating Pressure Min. / Max. Air Inlet Temperature Standard Intelligent Power Supply
All XCp Models -40°F -100°F (on request) 5-15% at 100 psig / -40°F 60 / 150 psig 40°F / 120°F 120-240 Vac
Slanted Seat Valves Standard

Drag your finger across the table to scroll

Model Connection Size (NPT) Flow Rate (scfm)
XCp 80 3/4" 80
XCp 100 1" 100
XCp 120 1" 120
XCp 160 1-1/4" 160
XCp 200 1-1/4" 200
XCp 250 1-1/2" 250
XCp 300 1-1/2" 300
XCp 400 2" 400
XCp 500 2" 500
XCp 650 2-1/2" 650
XCp 800 2-1/2" 800

Drag your finger across the table to scroll

Operating Pressure (psig) 60 70 80 90 100 110 120 130 140 150
Correction Factor 0.65 0.74 0.83 0.91 1.00 1.12 1.16 1.20 1.25 1.29

Drag your finger across the table to scroll

Inlet Air Temperature (°F) 90 95 100 105 110 115 120
Correction Factor 1.07 1.04 1.00 0.86 0.73 0.64 0.55

DRYPOINT ACF Heatless Desiccant Dryers for Higher Flow Rates

With an advanced controller and standard slanted-seat valves

Drag your finger across the table to scroll

Models Standard Pressure Dew Point Optional Pressure Dew Point Approx. Purge Air Consumption Min. / Max. Operating Pressure Min. / Max. Air Inlet Temperature Standard Power Supply Optional Power Supply
All ACF Models -40°F -100°F (on request) 15% at 100 psig / -40°F 60 / 150 psig 40°F / 120°F 115 Vac 230 Vac
Slanted Seat Valves Standard

Drag your finger across the table to scroll

Model Connection Size Flow Rate (scfm)
ACF 900 2-1/2" NPT 900
ACF 1300 3" Flange 1,300
ACF 1600 3" Flange 1,600
ACF 2000 4" Flange 2,000
ACF 3000 4" Flange 3,000
ACF 4000 6" Flange 4,000
ACF 5000 6" Flange 5,000

Drag your finger across the table to scroll

Operating Pressure (psig) 60 70 80 90 100 110 120 130 140 150
Correction Factor 0.65 0.74 0.83 0.91 1.00 1.12 1.16 1.20 1.25 1.29

Drag your finger across the table to scroll

Inlet Air Temperature (°F) 90 95 100 105 110 115 120
Correction Factor 1.07 1.04 1.00 0.86 0.73 0.64 0.55

DRYPOINT ACF PLUS Heatless Desiccant Dryers for Higher Flow Rates

With an advanced controller, dew point demand system and standard slanted-seat valves

Drag your finger across the table to scroll

Models Standard Pressure Dew Point Optional Pressure Dew Point Approx. Purge Air Consumption Min. / Max. Operating Pressure Min. / Max. Air Inlet Temperature Standard Power Supply Optional Power Supply
All ACF PLUS Models -40°F -100°F (on request) 5-15% at 100 psig / -40°F 60 / 150 psig 40°F / 120°F 115 Vac 230 Vac
Slanted Seat Valves Standard

Drag your finger across the table to scroll

Model Connection Size Flow Rate (scfm)
ACF PLUS 900 2-1/2" NPT 900
ACF PLUS 1300 3" Flange 1,300
ACF PLUS 1600 3" Flange 1,600
ACF PLUS 2000 4" Flange 2,000
ACF PLUS 3000 4" Flange 3,000
ACF PLUS 4000 6" Flange 4,000
ACF PLUS 5000 6" Flange 5,000

Drag your finger across the table to scroll

Operating Pressure (psig) 60 70 80 90 100 110 120 130 140 150
Correction Factor 0.65 0.74 0.83 0.91 1.00 1.12 1.16 1.20 1.25 1.29

Drag your finger across the table to scroll

Inlet Air Temperature (°F) 90 95 100 105 110 115 120
Correction Factor 1.07 1.04 1.00 0.86 0.73 0.64 0.55

  Features

  • Innovative, Reliable Design: high-quality components are used in construction and combined with high-level engineering
  • Compact Build: reduces traditional height by up to 30% without increasing the width
  • Advanced Controller: each dryer includes a feature-rich controller with energy-saving modes and innovative programming
  • Ease of Maintenance: innovative, open frame design where all features are front-mounted - simplifies maintenance and reduces PM costs
  • Wide Standard Range: up to 5,000 scfm from 60 to 7,250 psig with fully customized engineered solutions available

The operation of compressed air systems with conventional desiccant dryers can suffer from high, system-related air loss. This deficiency needs to be compensated via an increase in compressor performance, thus requiring a higher energy input.

DRYPOINT X desiccant dryers offer a convincing, economic solution to the problem: BEKO Technologies has developed a line of desiccant dryers that are focused completely on reducing energy consumption. By significantly reducing air loss and using the most energy efficient components possible, energy savings of up to 80% can be realized when compared to conventional designs. The energy savings alone offer a complete economic payback after a short period of time. DRYPOINT X represents a real system solution: the inline integration of CLEARPOINT compressed air filters, combined with BEKOMAT condensate drains represent a major safety asset.

By supplying application specific solutions, we can ensure that our customers receive personalized attention to their compressed air drying needs. The result is a system that will provide the most reliable, energy efficient solution possible.

All BEKO Technologies dryers are designed and tested to meet the strict quality guidelines of our company. There are no compromises to quality and reliability of any of our dryers.

How does it work?


Diagram showing the operating principle for DRYPOINT X and DRYPOINT ACF heatless desiccant air dryers from BEKO Technologies

Warm, moisture saturated air enters the dryer through the open inlet valve, a required coalescing pre-filter (not pictured) is installed before entering the drying tower (1). Air flows upward through the tower (2) where the desiccant extracts and retains water vapor, thereby lowering the dew point, before exiting the top of the tower. The dry air passes through the outlet check valve (3) and passes through the particulate post-filter (not pictured) before exiting the dryer to the air distribution system (4). A small amount of dry air is diverted from the outlet flow of the drying tower to be used in regenerating the other tower. This diverted air is controlled by the adjustable purge valve (5) and exits into the regenerating tower at near atmospheric pressure. This dry air flows downward through the tower (6), absorbing water from the moisture laden desiccant, before exiting near the bottom of the tower. This moist purge air passes through the purge exhaust valve and is vented to open atmosphere (7) through the muffler. After a set amount of time the air flow through the dryer will reverse, turning the drying tower into the regenerating tower.

  Dimensions

DRYPOINT XCe Economy Heatless Desiccant Dryers

With basic controller and slanted seat valves


Drawing showing the dimensions of a DRYPOINT XCe Economy heatless desiccant dryer from BEKO Technologies

Drag your finger across the table to scroll

Model A B C Weight Fill Per Column
XCe 80 69 in 31 in 22 in 128 lbs 95 lbs
XCe 100 69 in 34 in 24 in 203 lbs 150 lbs
XCe 120 69 in 34 in 24 in 203 lbs 150 lbs
XCe 160 69 in 39 in 27 in 311 lbs 230 lbs
XCe 200 69 in 39 in 27 in 311 lbs 230 lbs
XCe 250 70 in 45 in 32 in 460 lbs 340 lbs
XCe 300 70 in 45 in 32 in 460 lbs 340 lbs
XCe 400 73 in 51 in 36 in 649 lbs 480 lbs
XCe 500 75 in 54 in 38 in 845 lbs 625 lbs
XCe 650 76 in 62 in 41 in 1074 lbs 795 lbs
XCe 800 76 in 63 in 44 in 1270 lbs 940 lbs

DRYPOINT XCp Premium Heatless Desiccant Dryers

With standard humidity control and BEKOTOUCH PLC


Drawing showind the dimensions of a DRYPOINT XCp Premium heatless desiccant dryer from BEKO Technologies

Drag your finger across the table to scroll

Model A B C Weight Fill Per Column
XCp 80 69 in 31 in 22 in 153 lbs 95 lbs
XCp 100 69 in 34 in 24 in 227 lbs 150 lbs
XCp 120 69 in 34 in 24 in 227 lbs 150 lbs
XCp 160 69 in 39 in 27 in 341 lbs 230 lbs
XCp 200 69 in 39 in 27 in 341 lbs 230 lbs
XCp 250 70 in 45 in 32 in 493 lbs 340 lbs
XCp 300 70 in 45 in 32 in 493 lbs 340 lbs
XCp 400 73 in 51 in 36 in 679 lbs 480 lbs
XCp 500 75 in 54 in 38 in 872 lbs 625 lbs
XCp 650 76 in 62 in 41 in 1100 lbs 795 lbs
XCp 800 76 in 63 in 44 in 1315 lbs 940 lbs

DRYPOINT ACF Heatless Desiccant Dryers for Higher Flow Rates

With an advanced controller and standard slanted-seat valves


Drawing showing the dimensions of a DRYPOINT ACF heatless desiccant dryer from BEKO Technologies

Drag your finger across the table to scroll

Model A B C Weight Fill Per Column
ACF 900 96 in 65 in 38 in 1800 lbs 500 lbs
ACF 1300 96 in 76 in 42 in 2200 lbs 700 lbs
ACF 1600 92 in 88 in 48 in 3700 lbs 900 lbs
ACF 2000 108 in 88 in 48 in 4500 lbs 1200 lbs
ACF 3000 116 in 100 in 58 in 6000 lbs 1650 lbs
ACF 4000 118 in 134 in 52 in 7600 lbs 2250 lbs
ACF 5000 118 in 140 in 60 in 9500 lbs 2800 lbs

DRYPOINT ACF PLUS Heatless Desiccant Dryers for Higher Flow Rates

With an advanced controller, dew point demand system and standard slanted-seat valves


Drawing showing the dimensions of a DRYPOINT ACF PLUS heatless desiccant dryer from BEKO Technologies

Drag your finger across the table to scroll

Model A B C Weight Fill Per Column
ACF PLUS 900 96 in 65 in 38 in 1800 lbs 500 lbs
ACF PLUS 1300 96 in 76 in 42 in 2200 lbs 700 lbs
ACF PLUS 1600 92 in 88 in 48 in 3700 lbs 900 lbs
ACF PLUS 2000 108 in 88 in 48 in 4500 lbs 1200 lbs
ACF PLUS 3000 116 in 100 in 58 in 6000 lbs 1650 lbs
ACF PLUS 4000 118 in 134 in 52 in 7600 lbs 2250 lbs
ACF PLUS 5000 118 in 140 in 60 in 9500 lbs 2800 lbs

  Contact mdi

Please fill out the form below and your personal mdi product expert will email you your quote. The more information that you provide the quicker we can send you a quote. Sending an incomplete quote request could mean that we have to contact you for necessary information before sending your quote. And know that our knowledgeable sales staff is standing by to help you with your order and with any questions.






Please include your contact information so that we may reply to your request. Your contact information is private and will not be sold to any third party or used negatively in any way.










mdi does not advertise prices online. The cost of products is subject to change over time. In order to extend to you the best price that we can offer, we prefer to create written and emailed quotes which reflect any discounts or promotions currently available. Some products can be quoted over the phone, and expediting quotes and orders is always available per request.

See our Terms and Conditions for more information about the mdi sales process.


Call us any time Monday through Friday 7:30 AM to 5:30 PM ET.

Phone: (727) 835-0670 | Toll Free: 800-761-4298
Fax: (813) 571-0422 | Email or Fill Out the Form Above